2strokeworld - 2strokeworld.com - 2 Stroke World
General Information:
Latest News:
Re: RD600 27 Aug 2013 | 11:15 am
An LC or RZ Triple motor would rock. Build us one, Mark. with a stroker crank.
Re: Suspension upgrades 27 Aug 2013 | 10:05 am
looks vs practicality??? I feel the mono shock debate was answered in the 70s my bike weighs 270 wet, and where that weight was taken off makes a huge difference, my 0 to 100 and back to 0 is almost....
Re: RD600 27 Aug 2013 | 08:41 am
there was a time lapse of him doing that at a london bike show yrs ago, did it in 2 days.you don't need high tech tools to do these mods really, ive seriously looked into it, its not that bad. worst p...
Re: RD600 27 Aug 2013 | 08:28 am
Allen Millyard makes, or had made 5 cylinder H1's. I read he cuts the engine block by hand with a hacksaw, and matches the halves by hand filing the surface!!
Boost Bottle for Bansee on a R5? 27 Aug 2013 | 08:25 am
Could I make an intake setup for my R5 350 to accept a boost tube/bottle for extra power? Would it work or what could I do? ( sorry "crossover tube")
Isn't speedo rollback a crime? 26 Aug 2013 | 11:09 pm
Great bike, but i doubt the speedo is original http://sfbay.craigslist.org/sfc/mcy/4025491087.html Pet peeve; all the period parts and he puts on modern short stalks!
Re: To line tank or not 26 Aug 2013 | 11:02 pm
Just a word of warning for anyone that might be having their tank professionally painted. I did the Caswell coating before bringing my tank to a local autobody shop. They did a beautiful job, but af...
Re: To line tank or not 26 Aug 2013 | 10:08 pm
Quote from: MckayMotoWorks on August 23, 2013, 07:59:33 PM Good point. I'm putting way too much time and effort in my paint job to chance destroying my work. Good paint on the outside of the tank sh...
Re: More Piston Questions 26 Aug 2013 | 10:05 pm
Remember that there is a stroke and a flywheel size difference between the RD 350 and the 400 engines. If you put a 400 piston on a 350 conrod without making an adjustment to the piston skirts you ma...
Re: Honda-Yamaha CBRD250 Hybrid Cafe - longterm project - front end 26 Aug 2013 | 09:47 pm
After a bit of head scratching it turns out that the right side foot peg and rear brake pedal can easily mount onto where the original CB-175 passenger foot peg mounted. The master cylinder is slightl...
