Garageninja - garageninja.com - GarageNinja.com
General Information:
Latest News:
How To Jack Up Or Hoist Mazda RX7 (FD3S) 11 Jan 2011 | 05:40 pm
Following illustrations indicate areas (parts) of underbody and frame which may be used to raise and support vehicle using either floor jack or hoist. These points are indicated by shaded areas on fra...
RX7 Cooling System Specs (FD3S) 11 Jul 2010 | 06:49 am
Mazda RX7 cooling system specs applies to 1993-1995 FD3S models. Coolant Replacement Interval: 30,000 Miles Or 24 Months Coolant Capacity: 9.3 Qts. (8.8L) Radiator Cap: 11-15 psi Thermostat Opens ...
RX7 Automatic Transmission Removal (FD3S) 11 Jul 2010 | 06:40 am
Automatic transmission removal and installation applies to 1993-1995 Mazda RX7 models. On Mazda RX7 models with anti-theft radio system, obtain code number from customer to deactivate radio anti-thef...
Honda S2000 Clutch & Flywheel Removal 2 Jul 2010 | 07:42 am
Honda S2000 clutch removal applies to 1999-2003 models. SPECIAL TOOLS NEEDED Clutch alignment shaft 07LAF-PT00110 Remover handle 07936-3710100 Ring gear holder 07LAB-PV00100 or 07924-PD20003 Driv...
Honda S2000 Clutch Slave Cylinder Removal 2 Jul 2010 | 07:31 am
1. Remove the banjo bolt and washers, then disconnect the clutch hose from the slave cylinder. Plug the end of the clutch hose with a shop towel to prevent brake fluid from coming out. Honda S2000 19...
Honda S2000 Clutch Master Cylinder Removal 2 Jul 2010 | 07:21 am
Honda S2000 Clutch Master Cylinder Removal applies to 1999-2003 models. Do not spill brake fluid on your Honda S2000; it may damage the paint; if brake fluid does contact the paint, wash it off immed...
Honda S2000 Delay Orifice Mechanism 2 Jul 2010 | 07:14 am
The delay orifice mechanism improves clutch operation by delaying the slave cylinder release speed when the clutch pedal is suddenly released. The delay orifice mechanism is built into the slave cylin...
Honda S2000 Clutch Pedal Height Adjustment 2 Jul 2010 | 07:07 am
Clutch pedal adjustment applies to Honda S2000 1999-2003 models. Check the clutch pedal position switch. Check the clutch interlock switch. The clutch is self-adjusting to compensate for wear. If ...
Honda S2000 F20C VTEC Solenoid Testing 2 Jul 2010 | 06:31 am
Honda S2000 F20C VTEC solenoid applies to 1999-2003 AP1 models. Disconnect the 1P connector from the VTEC solenoid valve. Measure resistance between the terminal and body ground. Resistance: 14-30 ...
Honda S2000 Trunk Switch & Solenoid Test 2 Jul 2010 | 06:22 am
Honda S2000 trunk components and testing applies to 1999-2003 models. Trunk Wiring Diagram SWITCH TEST 1. Remove the rear console. 2. Disconnect the 2P connector from the switch. 3. Check for con...
