Mycncuk - mycncuk.com - MYCNCUK
General Information:
Latest News:
crazy idea 27 Aug 2013 | 06:21 pm
I had a dream last night, we've all seen the challenges we face building these machine frames and ensuring they are strong enough/ and straight enough etc. then once made we wish we had made them stro...
AM882 works with Protune - but not with the ZPA5-INT BOB 26 Aug 2013 | 04:33 pm
Hi All, Title covers it all really, I have been testing my AM882 / ZPA5 setup and I have a peculiar problem that I have narrowed down but not resolved. I can control the motor with the Pro tune soft...
Feeds and speeds 26 Aug 2013 | 03:42 pm
Maybe there should be a perminant section on speeds and feeds. I cant find it if there is one. Please can someone tell me the feeds and speeds for OAK cutting 3D with 6,4 and 2mm ballends ?
CNC Motion control 26 Aug 2013 | 06:18 am
In relation to the motion control equipment discussion. Quote: Originally Posted by JAZZCNC Regards the Motion control card then I'm a big fan of them and thou I haven't tried the one your using I ...
Small footprint turning centre 26 Aug 2013 | 01:32 am
Hi folks I think I have reached the point where I need a proper cnc lathe, I have been using boxfords for production runs. Need something faster with auto bar feed and will keep accuracy all day. Th...
Struggling with USB to RS485 USB-485 Converter 26 Aug 2013 | 12:04 am
So, followed this thread http://www.mycncuk.com/forums/router...-rs-485-a.html re the Huanyang VFD control plugin for Mach3, USB RS-485 bought the recommended usb gizmo from here USB to RS485 USB-...
Thk kr 25 Aug 2013 | 02:03 am
Hi, I've been reading this forum for a while now. Lots of knowledge people here. I was wondering if any of you had used or had any views on the KR actuators from THK? I can get a used THK KR55 with ...
Mitsubishi E600 HMI 24 Aug 2013 | 01:46 am
Has anyone got experience with the E600 HMI's? Basically, I transferred the program from an E600 HMI to my laptop, made a small edit with e-designer 7.5 and transferred it back to the HMI. The transfe...
PSU : prices and differences 24 Aug 2013 | 12:58 am
Hallo, Maybe some one can give me a short answer why I have to choose this one PSU: expensive instead of this one: cheap I know nothing about the electronics, but anyway.., I can't see any differen...
VFD to USB WIRING ???? 23 Aug 2013 | 11:06 pm
I have a 3 axis USB board AKZ250 and having a problem coupling to the LS Starvert IC5 Vfd I just bought http://www.inverterdrive.com/file/LS...ert-iC5-Manual .. I sort of have a an idea what goes wher...
