Open-e - forum.open-e.com - Open-E forums
General Information:
Latest News:
DSS V7 on Windows 27 Aug 2013 | 11:46 am
Hello! My OS is windows. I am thinking if DSS V7 can also compatible in any windows version?
ESX 4.1 loses iSCSI connection after reboot 27 Aug 2013 | 06:11 am
Hi, I'm running ESX 4.1 and planning to move the iSCSI storage from a single Windows Storage Server to two Open-E DSS V6 16TB Storage System which should run than Failover. Right now I have the stra...
New iscsi Task after removing 26 Aug 2013 | 05:47 pm
Hello, on a DSS 6.0up63.7101 i created 3 volumes und 3 iscsi targets responding to the volumes Everything was working fie. Now i deleted one on the targets and tried to create another one but there i...
DSS 6.0up98.8101.7337 64bit with ESXi 5.0.0 degraded performance 22 Aug 2013 | 12:54 pm
Hi All, Help, I'm seem to have an issue withe my DSS Setup. I have 2 DSS machines in a fail over configuration. Since upgrading to ESXi 5.0.0 I've had nothing but issues with I/O. My environment w...
SSD Raid levels and active active? 20 Aug 2013 | 08:15 pm
I want to hear others thoughts on using enterprise SSD in a hardware raid and what levels vs just using 2 storage servers in an active-active configuration? Cost is an issue here so that is why I had ...
DSS v7 - Active/Passive 19 Aug 2013 | 05:31 pm
Hi, I have 2 servers where I installed the latest DSS v7 version. Now I want to configure active/passive, but when I press button to start cluster I have information about cluster state: Code: Clus...
Windwos 2008 R2 cannot see FC LUN 10 Aug 2013 | 12:48 am
I had qlogic 2462 which target enable in OPEN-E. Windwos 2008 R2 with Qlogic 2462. FC is directly connect to open-e I used Open-E 6.0 with 32-bit I created a LUN. The server could not see it.
DSS v7 on Dell R720 8 Aug 2013 | 02:42 am
I'm trying to install DSS v7 b7637 trial on Dell PowerEdge R720, but the installer stops shortly after the boot menu, just the blinking cursor on empty black screen and stays there forever. I can hit ...
raid crash on one node of a activ/activ cluster 7 Aug 2013 | 03:47 pm
Hi, after a raid controller crash and 3 drives also crashed (raid 6) I must configure a new raid. Now I have no Volumes on the node. Is it possible to restore the configuration or must I configure it...
Exomium S200 and DSS V6 and LSI 9265i and Cachecade -> Data corruption 4 Aug 2013 | 09:35 pm
Hi, habe here an SuperMicro with LSI based certified OPEN-E Exomium S200 box with a LSI 9265i (with batt. backup and Cachecade 2.0 Pro). Cachecade SSDs are 4*Samsung 843T Pro in a RAID1. After 14 d...
