Refrigeration-engineer - refrigeration-engineer.com - Refrigeration-Engineer.com forums
General Information:
Latest News:
Condenser temperature according to the ambient 27 Aug 2013 | 04:44 pm
Hey I am working on a project in which we have an ambient temperature on 55 degree celsius, and most of the compressors that are out there will only be able to deliver a condensing temperature of 60 ...
LG Indoor/outdoor communication sniffing 27 Aug 2013 | 12:46 pm
Hello Dear Collegues, I'm new in the forum , but i want to kindly ask all of you to help me to solve the following problem: I want to attach one indoor unit from LG inverter to my house central heat...
30 XA low oil pressure reading 27 Aug 2013 | 09:41 am
Problem: On temperature achievment the unit shuts down, the oil differential pressure reads b to -1.04 and this condition appears on both the chillers for circuit A only. Action:Removed the transduc...
poly glycol low temp systems auto air vents. 27 Aug 2013 | 09:29 am
can anyone inform me if they have experence in automatic air vent valves for low temp glycol systems. thanks.
Spare parts Frick?York screw compressor TDSH 355 27 Aug 2013 | 05:14 am
Hello, I am performing corrective maintenance on compressor frick / TDSH york 355, but I can not bearings in frick. I wonder what the codes are the manufacturers of bearings (radial bearing NU 2322 wh...
mypro cp-3 27 Aug 2013 | 12:49 am
hi guys, i need manual of mypro cp-3 panel , I want to change setpoints and parameters for mycom screw compressor and i have no data for the procedure.
TK V-Series controller manual 27 Aug 2013 | 12:44 am
Hi I know a lot has been said about manuals... (been reading the forums a lot), but i really need to get a service/controller manual for the TK V-series (V200 - V500). Iam new to this transport busin...
Internal Volume 26 Aug 2013 | 10:18 pm
I have a nh3 coil that I am trying to find the Internal Volume on. I have the model# VF4H/3012E and the serial# 347/1 and the make is Lewis Industrial Products made out of Richmond B.C. Canada but the...
Fujitsu IR Remote AUTA18LAL Inverter fault 26 Aug 2013 | 06:07 pm
I have a client with Fujitsu AUTA18LAL Cassette with a fault unit has IR remote so unable to diagnose, has Red operation light on green light off and orange light is on for 5 seconds then off for 1 se...
Testing with a Megger 26 Aug 2013 | 03:34 pm
Hi Guys, I've been told a few different ways to do this by the blokes I work with. Can anyone confirm to me though the correct and safe way to test single and three phase motors using a megger. Eith...
